Where are ARB bumpers made

Follow an ARB Bumper through the entire manufacturing process. From a flat sheet of steel, experience every stage of our state-of-the-art factory in Melbourne, Australia, and take a unique look at the effort, passion and attention to detail required to build the world’s best 4×4 protection equipment.

Where are ARB bumpers manufactured?

Follow an ARB Bumper through the entire manufacturing process. From a flat sheet of steel, experience every stage of our state-of-the-art factory in Melbourne, Australia, and take a unique look at the effort, passion and attention to detail required to build the world’s best 4×4 protection equipment.

Is ARB made in China?

WHERE ARE ARB BULL BARS MADE? All ARB bull bars are manufactured right here, in Australia, from a state-of-the-art factory located in Melbourne.

Where are ARB products made?

ARB has manufacturing operations in Australia and Thailand, and maintains warehouse facilities in New Zealand, the United States, the Czech Republic and the United Arab Emirates, with products exported to over 100 countries.

Are ARB bumpers good?

These days FJ Cruiser owners have a wide array of the options when it comes to an aftermarket shell style bumpers but ARB remains as the standard by which others are measured. ARB is one of the best known companies for aftermarket 4×4 products. … In our case their bumper lived up to its reputation.

Is ARB Australian owned?

The origins of ARB can be traced back to Australia’s remote Top End, circa 1975. … Today, ARB is Australia’s largest manufacturer and distributor of 4×4 accessories. We also have an international presence, with an office in the US and an export network that extends through more than 80 countries around the globe.

Is ARB an Australian company?

It was exactly what Australian 4WDers had been waiting for, and ARB, the initials of Anthony Ronald Brown, was founded. Today, ARB is Australia’s largest manufacturer and distributor of 4×4 accessories.

Are TJM bull bars made in Australia?

TJM bull bars are designed, engineered, tested and manufactured in Australia.

Are ARB Bullbars made in Australia?

ARB Bull Bar Manufacturing From a flat sheet of steel, experience every stage of our state-of-the-art factory in Melbourne, Australia, and take a unique look at the effort, passion and attention to detail required to build the world’s best 4×4 protection equipment.

Are ARB Bullbars made in Thailand?

Additional bullbars are also produced at ARB’s Thailand plant, which predominately services ARB’s international market. “The Thai plant is fully owned by ARB, and the quality of the product is no different.

Article first time published on

Who is the CEO of ARB Corporation?

Andrew Brown has been the CEO of ARB Corporation Limited (ASX:ARB) since 2012, and this article will examine the executive’s compensation with respect to the overall performance of the company.

What are ARB canopies made of?

Built tough and proven reliable in the harsh Australian environment, ARB’s canopies are manufactured from UV stable ABS thermoplastic, making them a dependable solution you can rely on for many years to come.

Is ARB a franchise?

ARB also has 50 retail stores in Australia, with 21 owned by the company and the remainder franchised, but unfortunately the company doesn’t provide details of same-store-sales. … Exports will likely hold the key, currently representing 23% of total sales last financial year, and growing by 14%.

Who owns TJM?

ABOUT AEROKLAS Aeroklas Australia acquired TJM in early 2015; TJM was founded in 1973 and became the first company in Australia to manufacture and distribute quality 4WD equipment, primarily focussing on the supply of 4WD products and accessories.

Who is Anthony Ronald Brown?

One of Australia’s biggest 4WD Accessories companies built from humble beginnings! In 1975, a young man from Melbourne called Tony Brown returned home after a 4WDriving trip through the top end of Australia. … And so, Anthony Ronald Brown (Tony) put his initials to his new 4WD accessory company: ARB.

When did ARB list?

To continue on its rapid development and growth trajectory, and to further the development of the Air Locker, ARB needed more funds, so a decision was made to list the company on the stock exchange, which took place in 1987.

What does ARB stand for in cars?

The red component in the illustration below is an anti-roll bar, which nearly every racing car has on its rear and/or front axles. The ARB connects the suspension elements of two wheels on the same axle.

What is ARB product?

ARB offers everything for your expedition needs, including: Air Lockers, Roof Racks and Roof Rack Accessories, Lights, Tents, Camping Gear, Vehicle Awnings, Vehicle Refrigeration, Water and Fuel Storage, Storage Systems, Battery Management, Recovery Equipment, Ladders, and Vehicle Body Accessories.

What is an ARB for a truck?

The Air Resources Board (ARB) Truck and Bus Regulation requires diesel trucks and buses that operate in California to be upgraded to reduce emissions.

Where are PIAK Bullbars made?

Today we produce and export products to some of the toughest environments in the world. And now we’re here in Australia, so you can get outstanding protection for your vehicle.

Where are AFN bull bars made?

However, on this particular build, I noticed a heap of people were running a brand of bar that I’d never heard of; AFN. These are made in Portugal by a 4WD accessories company has been making military grade gear for some time.

How much does a ARB summit bull bar weigh?

Approximate weight of the bar, chassis mounts and fitting kit is 183 lbs. Approximately 48.5 lbs is removed from the vehicle for fitment of the bar netting only 134.5 lbs of additional weight.

Where are MCC bull bars made?

MCC bullbars are manufactured in their own manufacturing facility in Thailand. As many of the latest 4WD’s are manufactured in Thailand, this gives MCC direct access to the vehicles for product development to ensure the quick release of products, when new models get released to the Australian market.

Where are offroad animal bars made?

Australian designed and owned 4×4 equipment Offroad Animal is an Australian company that designs and manufactures 4×4 equipment. Each product has been designed and stringently tested here in some of the most extreme conditions by none other than mechanical engineer and owner, David Fitzpatrick.

Will a Hilux Bullbar fit a Prado?

SMARTBAR has launched new lightweight bull-bars for Toyota Hilux and Prado models. … Officially called ‘vehicle frontal protection systems’ or VFPS, the Prado 150 SmartBar is made for models from October 2017 onwards, while the new Hilux StealthBar will fit 2015 models and beyond.

How much does a nudge bar weigh?

Bull bars range from light weight bits of aluminium pipe (nudge bars) through to seriously heavy duty chunks of steel designed for regular animal strikes without damaging the vehicle. Full size Bull Bars generally weigh anywhere from 25 – 80kg, depending on the material used, thickness and overall design.

How much does an ARB deluxe bull bar weigh?

The ARB Large Tube Deluxe bull bar is well over 80kgs. The smaller Deluxe bull bar is around 65-70kgs.

Do ARB canopies leak?

ARB have advised canopies are water resistant not water proof and there is little they can do. Has anyone else had any issues with major water leakage.

How heavy is an ARB ascent canopy?

The dynamic weight of ARB’s canopies is approximately 100kg, while the static weight is between 350kg and 400kg.

Are ARB canopies waterproof?

Constructed from tough PU coated 300gsm poly/cotton rip stop canvas, the awning is fully waterproof and offer a UVP 50+ rating, and comes complete with a UV stable laminated PVC bag for storage. … ARB Awnings come in three great sizes, and telescoping legs allow fitment to up to 2.1m high mounting points.

Can you buy from ARB online?

ARB’s website offers online purchasing. Orders via phone, fax or email will not be accepted. … If any items from your order cannot be fulfilled we will contact you via email.