Recovery mode iphone 11 - How To Discuss

Recovery mode iphone 11

How to put your iPhone into recovery mode ? 1) Make sure your Mac is up to date. If you use iTunes, make sure you have the latest version of iTunes. 2) Open Finder on a Mac running macOS Catalina. Open iTunes on a Mac with macOS Mojave or earlier, or on a PC. If iTunes is already open, close it. 3) Keep the device plugged in, force reboot with these steps, but don't do it.

How to reset iPhone 11?

1) Connect your iPhone 11/11 Pro (Max) to PC or Mac with the official USB cable and launch the updated version of iTunes. 2) Turn off your iPhone 11/11 Pro (Max), press the Volume Up button, then the Volume Down button, then press and hold the Power button for three seconds. 3) Press and hold the power button and now press and hold the volume down button for 10 seconds. Now press and hold both buttons for ten seconds. 4) When 10 seconds have passed, release the power button and press and hold the volume down button for five seconds.

How to boot iPhone into recovery mode?

• Connect your iPhone to your computer with a Lightning to USB cable.
• Short press the volume up button on the left side of the device.
• Then press and release the volume down button.
• Now press and hold the side button (power button) for about ten seconds.
• After a few seconds, you'll see a Lightning cable with an arrow pointing at your Mac.

What causes an iPhone to go into recovery mode?

There are many reasons why your iPhone may be stuck in recovery mode, such as: B. iOS update, jailbreak, virus attack, etc.

How do I get my iPhone out of recovery mode?

Getting iPhone out of recovery mode is very easy. Just follow these two steps: press and hold the power and home buttons for about 15 seconds and wait for the screen to turn off. Release the Home button, but continue holding the Power button until the iPhone boots up.

What to do when iPhone is in recovery mode?

• Forced restart. If your iPhone is stuck in recovery mode, do not restore it directly. You may not need to restore your iPhone so as not to lose data.
• Use the software to exit recovery mode. If a hard reset doesn't help you get out of recovery mode, try third-party software.
• Restore iPhone in iTunes. If the third-party software didn't work for you, then you need to restore your iPhone. The restore process will erase your iPhone.

How do I start my iPhone in recovery mode?

Press and hold the Home button on your iPhone and connect the other end of the USB cable. When the Connect to iTunes screen appears, release the button. At this point, iTunes will automatically open and notify you that your iPhone is in recovery mode. Click "OK" and then click "Restore" to start the recovery process.

How do you unlock disabled iPhone?

If you don't want to unlock a disabled iPhone with iTunes, you can use Find My iPhone by following these simple steps: Go to your iCloud account and sign in. Then go to Find My iPhone and click on All Devices. Click "Erase iPhone" and confirm the action.

How do I recover a disabled iPhone?

How to fix iPhone is disabled Connect to iTunes: Connect iPhone to computer. Open iTunes. Select iPhone (in the sidebar or top right corner of the screen). On the Summary tab, click Restore. If iTunes is successfully restored, your device will be erased and restored as a new device.

How do I enable a disabled iPhone?

Below are the steps to activate a disabled iPhone with iTunes. Connect your disabled iPhone to the computer you synced it with. Open iTunes and wait while iTunes syncs and backs up your device. After the sync and backup is complete, click "Restore" to activate the device.

How to enable a disabled iPhone?

• Connect your iPhone 11 to a computer with iTunes already installed. Once connected, iTunes should launch automatically.
• In the iTunes bar, click the device icon at the top. All the information about your iPhone 11 will be displayed on the screen.
• Now switch to the "Summary" tab which is visible on the left side of the panel.

How do I Find my iPhone from another device?

Use another iPhone or iPad. Open Find My iPhone on another device. Sign in with your Apple ID. Use the Apple ID and password you used on your iPhone. Touch your iPhone. It should appear in the list of devices below the map. Click Actions. This button is located at the bottom center of the screen. Tap Play sound. This option is located in the lower left corner of the screen.

How can I Find my iPhone in my house?

From there, click the Find My iPhone icon. Click on "All devices" in the top center and select the missing device. See where the phone is on the screen. If this is your home, click Play Sound. You will receive a ping from your phone and a Find My Phone notification will appear on the screen.

How do I Find my iPhone location from my computer?

To use Find My iPhone from your computer, sign in with your Apple ID and password. All your devices are shown on the map. Tap All Devices at the top of the screen to see a list of all the devices with Find My iPhone turned on and associated with your Apple ID.

Can I Find my iPhone on Windows 10?

Use a Lightning cable to connect your iPhone to Windows 10. Install the drivers on your Windows 10 computer. Then click "Trust" on your iPhone to grant access. Then your iPhone screen will be mirrored directly to your Windows 10. LetsView is another alternative tool that you can use to mirror your iPhone to Windows 10 wirelessly.

How to enter recovery mode iPhone 8?

• Connect iPhone 8 Plus, iPhone 8 to computer with USB cable.
• Open iTunes (Mac or Windows, or on macOS Catalina, open Finder)
• Press the Volume Up button on iPhone
• Press the volume button on the iPhone
• Press and hold the power button until iPhone 8/Plus enters recovery mode.
• iTunes (or Finder) displays a warning message that it has found an iPhone in recovery mode.

How do you reset iPhone 8?

Follow these instructions to hard reset your iPhone 8: Turn off your iPhone 8. Press and hold the Volume Up button for a few seconds, then quickly release it. Repeat the same steps for the Volume Down button. Hold them for a few seconds and then quickly release them. Now press and hold the power button for a few seconds.

How to restore iPhone 8?

1) Turn on your device. You should see a welcome screen. If you've already set up your device, you'll need to wipe everything before you can follow these steps to restore from a backup. 2) Follow the on-screen instructions until you get to the Apps & Data screen, then click Restore from iCloud Backup. 3) Sign in to iCloud with your Apple ID. 4) Select a backup.

How do you turn off iPhone 8?

To turn off your iPhone 8 or iPhone 8 Plus: Start from the Home screen. Tap the "Settings" icon to launch the app. Click General. Device now, iPhone lock screen Press and hold When prompted, slide your finger over the shutdown dialog.

How do you get your iPod Out of recovery mode?

Here are some tips to put your iPod into recovery mode when you need to solve a problem. Connect your iPod to your computer and launch iTunes if it doesn't open automatically. Press and hold the power button and the home button at the same time for about 15 seconds. Your iPod is now in recovery mode.

How do I completely reset my iPod?

Reset iPod Touch with iTunes Connect your iPod Touch to your computer. Launch iTunes. Press the iPod button. Click the "Restore iPod" button. Click Confirm when prompted. Click "Backup" if you want to restore after reboot. This will create a backup that will be used to restore after the reboot process is complete.

How do you put your iPod into Disk Mode?

Using your iPod without a Click Wheel Make sure your iPod is charged before putting it into disc mode. Turn the standby switch on and off. Press and hold the Play/Pause and Menu buttons until the Apple/iPod logo appears, then release.

How do I restore a backup to my iPod?

Restoring from an iTunes Backup Connect your iPod to the computer where the backup is located. Make sure you have the latest version of iTunes on this computer. Choose File > Devices > Restore from Backup. If you are using iTunes or earlier, right click on your device and select Restore from backup.

How to put iPhone in recovery mode without a computer?

This is how you can put your iPhone into recovery mode without using a computer.
Step 1 : Turn off the iPhone.
Step 2 : Then follow the steps below based on your device model. To put the newer iPhone 8, iPhone X, and iPhone 11 models into recovery mode, short press the volume up button and then short press the volume down button.

How do I Put my iPhone 7 in recovery mode?

For iPhone 7 and 7 Plus: To put iPhone 7 models into recovery mode, press and hold the power button and the volume down button at the same time. Continue to hold the keys until the recovery mode screen appears.

How to fix home button not working on iPhone?

If your home button is broken but still works, or if you don't want to install the above program on your computer, you can manually put it into recovery mode by following these steps. For iPhone 8/8 Plus and iPhone SE Connect your device to your computer. Now quickly press the volume up button and then quickly press the volume down button.

How to enter recovery mode with Broken Home button?

Enter recovery mode with broken home button 1 Connect your device to your computer. 2 Now quickly press the volume up button and then quickly press the volume down button. 3 Now press and hold the side button until the Connect to iTunes logo appears. Your device will display the Apple logo.

How to get an iPhone out of recovery mode?

• Turn off iPhone by pressing and holding the Sleep/Wake button (right on iPhone 6 and above, top corner on all other iPhones).
• Buy a computer with iTunes installed. Ideally, this is the computer you're syncing with, but any computer with iTunes installed will work.
• The following steps depend on your iPhone model: iPhone 8 and later: Connect the sync cable to your iPhone.

How do you properly restore an iPhone?

Switch on the device. You should see a welcome screen. If you've already set up your device, you'll need to wipe everything before you can follow these steps to restore from a backup. Follow the on-screen instructions until you get to the Apps & Data screen, then click Restore from iCloud Backup. Sign in to iCloud with your Apple ID. Choose a backup.

How to help iPhone exit recovery mode?

• Open iTunes and connect your iPhone to your computer with a USB cable. A pop-up window will appear.
• Click the iPhone icon in the top left corner to open the Summary tab. Then click "Restore iPhone".
• In the next pop-up window, click "Restore" to confirm that you want to exit recovery mode by factory resetting your iPhone.

How do you put an iPhone in recovery?

7 Steps to Put iPhone into Recovery Mode Disconnect iPhone from PC or Mac Launch iTunes on PC/Mac. Press and hold the power and home buttons for 10 seconds or until the screen turns off. Press and hold the home button but release the power button. Connect iPhone to PC/MAC via USB. The iPhone shows the iTunes icon and a USB cable.

How do I restore my iPhone back to factory settings?

Factory reset iPhone by connecting iPhone to iTunes. Select iPhone from the iTunes sidebar, then select Restore. This will delete all content and settings from the phone and reinstall the factory software.

How do I force restart my iPhone?

Step 1 : Connect your iPhone to your computer and open iTunes.
Step 2 : Perform a hard reboot by pressing and holding the Sleep/Wake button and the Volume Down button at the same time for 10 seconds.
Step 3 : Release the Sleep/Wake button.
Step 4 : Press and hold the volume down button for another 10 seconds.

How to restart iPhone without swiping?

1) Open the Settings app on your iPhone > General. 2) Click on Availability. 3) Select Assistive Touch in the Interaction section. 4) Turn on the AssistiveTouch switch. 5) Press the assistive touch button. 6) Click "Device" and then click "More". 7) Finally, click "Reboot" to reboot your device.

How to DFU iPhone 11?

• First, make sure your iPhone is connected to your computer and iTunes is running.
• Turn off your iPhone if it is on.
• Press and hold the side button for three seconds. When you see the Apple logo, press and hold the Volume Down button.
• The Apple logo will disappear and you can release the side button. Press and hold the volume down button
• iTunes should now display a warning to confirm that the device is being restored.

How to unlock an iPhone 11?

• Check if your carrier offers unlocking. Only your carrier can unlock your iPhone.
• Contact your carrier and request an unlock. Your account may need to meet the unlock requirements. It may take a few days after submitting the application.
• Once your carrier confirms that you have unlocked your iPhone,

How do you unlock your iPhone if you forgot the password?

How to reset or unlock iPhone if you forgot your password. Go to your iPhone settings and select > iCloud. Scroll down and click Find My iPhone. Turn on Find My iPhone and Send Last Location. Then go to > iCloud. Sign in with your Apple ID and password to access iCloud.

How to unlock iPhone if forgot password?

1) Open the iForgot website and enter your Apple ID username to continue. You have to equip the platform with it. 2) Since you can't use your Apple device or haven't received a notification yet, you need to click Not possible. 3) Add the code provided and then the Apple ID password that can be used to unlock the device.

How to unlock iPhone when forgot pin?

• Connect your iOS device to your trusted computer as usual.
• Now that you have the latest backup saved to your computer, you can select the restore option in iTunes.
• Once the data wipe is complete, the phone will boot. Set it up with the username and password above.

How to factory reset iPhone 11?

• Tap the Settings icon.
• Select the General option.
• Scroll down and select Reset.
• Click the "Remove all content and settings" button.
• Click the "Clear Now" button.

Why is my iPhone not shutting off?

Reasons why your iPhone won't turn off. The most likely reasons why iPhone won't turn off are: It freezes due to software issues. The sleep/wake button is broken. The screen is broken and does not respond to touch.

How do you reset your iPhone to factory settings?

Reset iPhone Settings via iPhone - Home Settings. Press General. Scroll down to General. Click reset. Click Remove all content and settings. Enter your iPhone passcode. Confirm the reset by clicking "Erase" to reset your phone after reboot. Now you can set it up as a new phone.

How to unlock iPhone without passcode?

• To activate Siri on your iPhone, simply press and hold the Home button. Siri is instantly activated on your iPhone.
• A world clock appears with a list of melodies to select for the alarm.
• In this option, you will see the "Buy More Songs" tab, which will immediately prompt you to access the iTunes Store.

How do you recover a forgotten iPhone passcode?

How to Restore Forgotten iPhone Restrictions Passcode: Click your iPhone backup in the left column of the backup decryption browser. In the middle column, select Password ■■■■■■■ restrictions. After a few seconds, the passcode for your iPhone restrictions will appear in the right column.

How do you unlock a locked iPhone?

Unlock a locked iPhone with a screen password with iMyFone LockWiper
Step 1 : Install and open iMyFone LockWiper and click Start.
Step 2 : Connect your iPhone.
Step 3 : The next step is to boot into DFU mode.
Step 4 : In the window, select the desired phone information from the drop-down list.

How to emergency shut off iPhone?

• Open the iOS Settings app.
• Enable AssistiveTouch (located in Settings > Accessibility > Touch or Settings > General > Accessibility > AssistiveTouch). You can also activate it
• Tap the slider next to AssistiveTouch to add a Touch Home button to your screen.
• Press the new Home button on the touchscreen.
• Tap Device.

How do you turn off frozen iPhone?

Press and hold the power button at the top of your iPhone for three seconds until you see a red slider at the top of the Devices screen. Place your finger on the arrow and slide it to the right to turn off the device. Leave your phone off for 10 seconds then press and hold the power button until it turns back on.

What to do if my iPhone froze?

Apple suggests that a normal restart (turning your iPhone off and on again) is your first attempt at fixing an iPhone freezing issue. Press and hold the Sleep/Wake button on your iPhone until a slider appears. Use the slider to turn off your iPhone.

How to factory reset iPhone without password?

• Select Factory reset iPhone. Click "Fix Now" to continue. Therefore, resetting iPhone will erase all data and reinstall the latest version of iOS on your device.
• Click Fix Now to reset iPhone without password. Then you need to download the firmware package. Set the backup path and click "Download" to start downloading.
• Download firmware to reset iPhone without password. When the firmware is downloaded to the computer, click "Start Repair" to reset iPhone to factory settings without password.

How to reset iPhone using iTunes?

1) Open Finder on a Mac running macOS Catalina. Open iTunes on a Mac with macOS Mojave or earlier, or on a PC. 2) Connect your device to your computer. 3) If you are prompted to enter your device password or to trust this computer, follow the on-screen instructions. If you have forgotten your password, please contact them for assistance. 4) Select your device when it appears on your computer.

How do you factory reset an Apple iPhone?

Back to factory settings. Connect your Apple iPhone X to your computer. Turn off your phone. Press and hold the power button for about 3 seconds. Then press and hold the volume up and power buttons for about 10 seconds. After 10 seconds, release only the power button.

How can I unlock my iPhone for free?

• Tap Safari to launch the iPhone web browser.
• Go to JailbreakMe (see Resources).
• Slider for Jailbreak Slider to download and install JailbreakMe software
• Click on "Settings".
• Click Network.
• (More Articles)

How do you restart an iPhone?

Just like restarting your computer often fixes problems, sometimes restarting your iPhone can do wonders: long-press the sleep/wake button. Slide the red slider to turn off the iPhone and wait a few seconds. Press and hold the Sleep/Wake button again until the Apple logo appears on the screen.

How do I reinstall my iPhone?

Reinstall iOS. 1. Connect your iPhone to your computer with a USB cable. Launch the iTunes application. 2. In the Devices section, click the name of your iPhone and then click the Summary tab for your device. 3. Click the "Restore iPhone" button.

How do I restore data from iPhone?

Using iTunes Make sure you have the latest version of iTunes. Connect your iPhone to your desktop. Open iTunes. Click on your iPhone icon. Click "Back Up Now". Click Restore iPhone. Click Restore. Wait for the restore process to complete. Click Restore from this backup.

How to completely reboot the iPhone?

1) Press and hold the side and volume up buttons until the power off slider appears. 2) Drag the slider and wait 30 seconds for the device to turn off. 3) To turn the device back on, press and hold the side button (on the right side of the iPhone) until the Apple logo appears.

How do you put your iPad into recovery mode?

How do you put your iPad into recovery mode? Make sure your iPad has enough power. Connect your iPad to your computer. Open iTunes. Press and hold the Sleep/Wake and Home buttons at the same time. You will see the iPad recovery mode menu with recovery and update options. Set up your device.

What to do when your iPad won't turn on?

Connect your device to your computer. Open Finder on a Mac running macOS Catalina. On a Mac with macOS Mojave or earlier, or on a PC, open the. Find your device on your computer. With your device connected, do the following: iPad models with Face ID: Short press the volume up button. Quickly press and release.

How can I reboot into recovery from Fastboot?

Go to Settings > Battery > Disable FASTBOOT. Turn off your phone. Press and hold VOLUME DOWN + ON/OFF for 5 seconds. Release POWER but continue holding VOLUME DOWN. Once in the bootloader, use the VOLUME buttons to invoke RECOVERY .

How do I put an iPad in DFU mode?

Connect your iPad to your computer with a USB cable and launch iTunes. Press and hold the power button (3 seconds). Press and hold the power button and also press and hold the home button (15 seconds). Then release the power button while holding down the home button (10 seconds). This method puts the iPad into DFU mode.

How to get into and out of iPhone recovery mode?

Here's what to do: Download and install Tenorshare ReiBoot on your Mac/Windows PC. Then connect your iPhone to Tenorshare ReiBoot. When your iPhone is in recovery mode, you will see a highlighted option to exit recovery mode with one click. Press the "Exit" button on the screen. After a few minutes, your iPhone will exit recovery mode without performing a restore.

Does iPhone 8 Plus have portrait mode?

Portrait mode uses the dual cameras on the iPhone 7 Plus, iPhone 8 Plus, and iPhone X to create a depth of field effect. This allows you to capture a shot that keeps your subject in focus while also creating a pleasing background blur.

How do you start a MAC in recovery mode?

Once configured, you can follow these steps to put your Mac into recovery mode: Restart your Mac Press and hold the Option key on your keyboard when you hear the beep. Insert a bootable OS X recovery disc into your Mac and select it from the list of prompts. Your Mac will boot into recovery mode and you can start repairing your Mac.

How to boot Mac into recovery mode?

• Restart your Mac.
• Hold down the Option key when the startup beep sounds.
• Plug in the Time Machine drive. It will take a while for the system to recognize the drive. You may need to enter
• Select a drive to boot your Mac into recovery mode.

How do I get my Mac out of safe mode?

To put your Mac into safe mode, hold down the Shift key on startup. You can stop holding the Shift key when you see the Apple logo and progress bar. To get out of safe mode, simply restart your Mac without holding down the Shift key.

How to enter in to the recovery mod?

• Connect your iPhone XR, iPhone XS, iPhone XS Max, or iPhone X to your computer with a USB cable.
• Open iTunes on a computer (Mac or Windows, or open Finder on macOS Catalina)
• Press the Volume Up button on iPhone
• Press the volume button on the iPhone

Is the iPhone 7 Plus unlocked?

An iPhone 7 Plus can be permanently unlocked by adding an IMEI number to the manufacturer's database. To unlock your iPhone 7 Plus to work on any network, you need to select the network the device works on. Unlockable networks for iPhone 7 Plus include: Sprint, TMobile, Verizon, AT&T, EE, etc.

What is the iPhone 7 Plus?

The iPhone 7 and 7 Plus are Apple's cheapest iPhones, with a better camera, glossy black, faster processors, and improved water resistance with a no-press home button and no headphone jack.

What can they do with Android recovery mode?

If your Android is stuck in recovery mode, try these solutions Solution 1: Check the buttons on your Android device. One of the most common reasons is that one of the buttons to access Android System Recovery is broken or. Solution 2 - Force restart your Android device Solution 3 - Backup your Android data and factory reset your device .

How to enter safe mode on Android phone?

• Press and hold the power button.
• Press and hold Power off.
• When prompted to reboot to safe mode, tap again or tap OK.

How do I recover my Android phone?

Turn off your Android phone. Press and hold the volume down button for 10 to 20 seconds, then briefly press the power button. Select the recovery option by using the Volume Up and Power buttons to confirm. When you see the Android logo, press and hold the volume up button and release the power button. Select wipe data/factory reset.

How do I recover data from my Android phone?

Recover deleted files on Android phone. Download GT Data Recovery from the Google App Store. Open the app and select the type of file you want to delete. Now click on "Start new scan". Once the scanning process is completed, you will see several files. Just select the files you want to recover and click "Recover".

How to start Windows 10 in safe mode?

• Start Windows 10 in safe mode from Settings.
• Start Windows 10 in safe mode via msconfig.
• Start Windows 10 in safe mode by booting from the Start menu.
• Start your Windows 10 PC in Safe Mode from the login screen.
• Boot into Windows 10 safe mode with black/blank screen.
• Boot into Windows 10 safe mode by booting with the F8 key.

How do I create recovery point in Windows 10?

• Open File Explorer > right click on This PC and select Properties.
• On the System Properties screen, click the System Protection link in the left pane.
• In the System Properties screen, click the New button.
• On the next screen, enter a name and date for the restore point and click Create.

What to do when Windows won't boot?

• Start Windows in safe mode. The so-called safe mode should always be the first resort if Windows does not start normally.
• Try Windows Automatic Repair. If safe mode doesn't work, try Automatic System Restore.
• Restore an earlier version of Windows.
• Restore the download manager.
• Reinstall the Windows operating system.

How to boot into Windows Recovery Environment?

• On the login screen, click Shut Down, then hold down the Shift key and select Restart.
• In Windows 10, select Start > Settings > Update & Security > Recovery > Under Advanced Startup, click Restart Now.
• Boot from recovery media.

How do I get my phone out of recovery mode?

To get out of recovery mode, make sure your USB cable is connected to the laptop running iTunes and you may need to hold down the Home button while plugging in the USB cable as above. Now press and hold the Home and Sleep/Wake buttons together until the Apple logo appears.

How can "recovery mode" rescue your iPhone?

1) With iPhone recovery mode, you can now restore your iPhone or change the firmware if necessary. 2) After you restore or flash your iPhone in recovery mode, the iPhone will reboot automatically. 3) After restoring iPhone, it will exit recovery mode by itself.

How can I backup my iPhone in recovery mode?

The following steps should help you get your iPhone out of recovery mode: Open iTunes on your computer. Connect your iPhone to your computer with a USB cable. Choose to restore iPhone with the latest backup. Click "OK" to restore your iPhone to the latest backup and exit recovery mode when done.

What is iOS recovery mode?

Recovery mode is the default way to update and restore iOS devices. This is a typical recovery screen where the USB cable and iTunes will appear on the screen. You often see this mode after an iOS update or when setting up a new service. The recovery mode is shown in the image on the right.

How do I get my iPhone out of safe mode?

Safe mode is very easy to start. When your iPhone is in safe mode, you can restart it normally by clicking Restart on the MobileSubstrate menu. If you can't find the menu, tap the "Exit Safe Mode" text in the top center of the iPhone's status bar.

How do I take my iPhone out of recovery mode?

Using iPhone Buttons Turn off iPhone while connected to a computer. Press and hold the lock button and the home button on your iPhone for ten seconds. Release the home button (or volume down) after ten seconds. Release the lock button when the Apple icon appears.

How to unlock disabled iPhone 11?

• Connect your iPhone to the device where you last synced it with iTunes, and iTunes will launch automatically.
• In iTunes, click your device icon, then click Explore > Restore Tabs.
• Follow the on-screen instructions to unlock your device.

How do I power off my iPhone 11?

• Press and hold the side button and either volume button until you see the power off slider.
• Drag the slider labeled Slide to disable to the right. You can also access emergency SOS and medical records from this screen.
• The phone will now turn off.

How do you sign into iTunes on your computer?

iTunes desktop version. To sign in from the Store menu, press the Alt key, open the Store menu and click Sign In. Photo courtesy of Apple. Open iTunes on your computer and click Connect in the top menu bar to open the Connect to iTunes Store dialog box. Click the "Create Apple ID" button to create a new Apple ID.

How do I login to my iTunes account?

To sign in to your iTunes account, go to "Enter your Apple ID" in the first field of the login box on the right. Enter your password in the "Password" field. Click Connect.

How do you connect iTunes to your computer?

USB connection Connect your iPhone to your desktop computer. Use the USB cable that came with your device. open iTunes. This app has a music note icon. iTunes may launch automatically when you plug in your iPhone. Click on the iPhone icon. It will appear in the top left corner of the iTunes window. Click on "Back Up Now".

Can I log in to iTunes from any computer?

If you want to log into your iTunes account from another computer, e.g. For example, while traveling, you can grant access to your iTunes account and purchases to up to five offline computers at a time. Open iTunes and click Save. Select "Authorize this computer" and enter your Apple ID and password.