How much does a pine fence cost

Pressure-treated pine fences typically cost anywhere from about $10 to $25 per linear foot, including fence installation costs. That means that if you need 150 linear feet of fencing–the average for a typical residential backyard–a pine fence will run you anywhere from $1,500 to $3,750.

How long will a pine fence last?

Natural life of wood The most commonly used wood types for fences are cedar, spruce, and pine. Depending on the species, cedar may last for about 15-30 years, spruce may last for about 4-7 years, and pine may last for about 5-12 years.

How much does a 100 foot fence cost?

Linear FootCheaper (Wire or Electric)Moderate (Wood)8$10 – $50$100 – $200100$100 – $600$1,000 – $2,000150$150 – $1,000$1,500 – $3,000300$300 – $1,800$3,000 – $6,000

Is pine wood good for a fence?

Pressure treated pine is one of the most popular choices in residential outdoor structures, which includes fences, porches and decks. PTP is prone to shrinking, warping and cracking, which is made worse by the sun. In order to prevent decay, weathering and termites’ pressure treated pine is chemically treated.

How much does a typical wooden fence cost?

Wood Fence Costs Homeowners pay an average of $2,910 to install a wood fence, or a range between $1,699 and $4,152. Wood fences cost $17 to $45 per linear foot. Lumber averages from $7 to $15 per foot while labor ranges from $10 to $30 per foot. The largest cost factors include the fence’s length, height and wood type.

Should you stain a pine fence?

Whether or not to stain pine fences is primarily a matter of preference. It is done in an attempt to maintain a specific appearance throughout the life of the fence, or to extend the longevity of the fence. Most woods, including treated pine, will eventually fade to a silver-gray color.

Is cedar or pine better for a fence?

Cedar is generally regarded as the stronger and more durable of these two woods. It does not need any special treatment and stands up well to the elements, with a low risk of warping and shrinking. Pine, on the other hand, is more at risk of buckling, warping, and shrinking.

Is pine expensive wood?

Pine. Pine is an inexpensive, lightweight wood that can be yellowish or whitish with brown knots. It’s often used for rustic pieces, like farmhouse-style tables. Pros: Pine wood is low-cost, and it takes paint well, so it’s great for kids’ furniture.

How long will untreated pine fence posts last?

If properly treated and installed, pine fence posts can last for 20–35 years; untreated pine posts might only last 3–7 years.

Which is harder pine or cedar?

Hardness. Aromatic red cedar has a Janka rating (used to test the relative hardness of wood) of 900, while southern yellow pine is behind by a bit with a Janka rating of 690. So cedar is a little harder.

Article first time published on

What is the cheapest fence to install?

• Treated pine ($12 to $19 per linear foot installed) …
• Chain link ($10 to $20 per linear foot) …
• Wrought iron ($24 to $32 per linear foot) …
• Barbed wire ($1.50 to $2 per linear foot) …
• Hog wire ($3 to $5 per linear foot) …
• Electric ($1 to $6 per linear foot) …
• Pallet (free!)

How many fence posts do I need for 1 acre?

If we assume that your property is equal on 4 sides, then it is as simple as taking the square root of 43,560 square feet. This gives you 209 feet on each side, which would require 835 linear feet of fence to enclose the entire acre property (209 feet times four sides is equal to 835 linear feet).

How much would it cost to build a fence around 1 acre?

Fencing Cost Per Acre The cost to fence 1 acre runs a minimum of $1,050 and a maximum of $33,400 with most homeowners spending an average price of $2,016 to $9,011. The cheapest backyard fence is barbed wire which costs as little as $1,050 an acre, wheres a split rail wood fence costs about $7,000 for 1 acre.

How do I calculate how much fence I need?

⇒ Total cost of fencing = cost of fencing per meter × total fencing. ⇒ Total cost of fencing = 18.50 × 1200. ⇒ Total cost of fencing = Rs. 22,200.

What is the cheapest privacy fence?

If privacy is important for you, your cheapest fencing option is bamboo rolls or panels. There are cheaper fence materials, such as hog wire and chain-link, but they’re see-through and therefore don’t make good privacy fences.

How much does a 6 wood fence cost?

National Average Cost$2,755Maximum Cost$6,321Average Range$1,711 to $3,290

Is pressure treated pine good for fences?

Pressure-Treated Wood Pressure-treated lumber is a widely available and budget-friendly material for decks, fences, and other outdoor constructions. … This type of wood, while affordable, is susceptible to warping and requires yearly restaining and refinishing.

What is the best wood for fences?

• Pine wood is common because of its relatively inexpensive cost and longevity. …
• Cedar doesn’t require much maintenance and the wood contains natural insect-repelling substances.

What type of fence is most durable?

Masonry wall fencing is the most durable fence material. This includes brick, concrete, stone, block, and even stucco. It’s known for its longevity and can last over 100 years without any issues.

How do I keep my pine fence from turning GREY?

Use exterior oil-based stain or latex paint, which will seal out moisture, prevent wood rot, limit the amount of weathering and extend the life of the wood. Choose a stain or sealant with a UV inhibitor to help keep the wood from turning gray. Let the wood dry for about a week before applying a stain or sealant.

Is it OK to stain only one side of a fence?

A question that customers sometimes ask is whether both sides of the fence should be sealed. … In reality, if one side of the fence faces a neighbor and they choose not to stain or seal their side will discolor and yours won’t, without this affecting the structural integrity of the structure.

Do you need to paint treated pine fence?

Treated pine palings are a natural timber product, if not treated they will grey over time and dry out causing splitting and cracking in your fence which will lead to it needing replacing sooner rather than later. You can increase the life of your fence by either painting, oiling or staining.

How do you protect pine post in the ground?

1. Wet Rot Vs. Dry Rot. …
2. Choose Rot Resistant Wood. …
3. Dry the Fence Posts Out. …
4. Consider Adding Posts to Concrete. …
5. Apply Preservative to the Wooden Post. …
6. Consider Staining Your Wood. …
7. Start Digging. …
8. Fill Up the Hole.

Can I use trees as fence posts?

Using trees as living fence posts saves you time and money when putting up a fence. … He says to minimize tree damage, do not staple fencing material directly on the trunk. Over time as the trees build on their layers, the staples and the fence wire will become ingrown.

What is the longest lasting fence material?

Generally, the two most durable and long-lasting fencing materials include wrought iron and steel fencing. Steel is a little more common on residential properties due to the fact that it is lighter and more versatile than wrought iron. Still, steel fencing can be extremely heavy and durable as a result.

What are the disadvantages of pine wood?

Advantages of PineDisadvantages of PineLight WeightSusceptible to Scratches and DentsResists Shrinking & SwelllingCan be easily damagedGood ElasticityAttractive Grain Options

What wood is closest to pine?

Considered a hardwood, Poplar is softer than Maple and is more akin to Pine. It has a distinctive open grain which gives it a uniquely striking characteristic.

How long does pine wood last?

Pine varieties have a projected life span of only 5 to 10 years.

How flexible is pine wood?

Pine lumber is a very flexible wood that is both durable and comes in a wide range of colors. It is used in all aspects of both raw construction and finer woodworking projects.

How do you make pine weather resistant?

1. Use linseed or Tung oil to create a beautiful and protective hand-rubbed finish.
2. Seal the wood with coating of polyurethane, varnish, or lacquer.
3. Finish and waterproof wood simultaneously with a stain-sealant combo.

What is pine wood good for?

Yes, Pine wood is strong. It is a very stiff softwood with relatively high compressive strength, density, and bending strength than most other softwoods. This makes pine wood strong and durable to use for making furniture, paneling, window frames, roofing, and many other woodworks.